Video Capture and Synchronization

Don't miss a texture analysis minute! Capture and replay each video frame and see the corresponding behavior on the force-distance-time curve. Replay visual recordings frame by frame or play them in a loop synchronized with the corresponding force-distance-time graph.

Learn more

Temperature & Humidity Measurement Modules

Texture Technologies offers several temperature control attachments that complement the Stable Micro Systems' family of texture analysis instruments. The thermal cabinets and Peltier plates assist users to get highly accurate and reproducible test results for temperature-sensitive products.

Learn more

Automated Linear Indexing System

The ALIS can help make a direct impact on your bottom line by automating your manual, high volume repetitive testing. Your operators can set a product cartridge in place and walk away while the instrument automatically conducts and then analyzes a batch of tests.

Learn more

Acoustic Envelope Detector

SMS' Acoustic Envelope Detector was developed based on requests from both university and commercial research departments for a method to precisely measure the acoustic energy released during physical test. The A/RAED system is calibratable so that the acoustic behaviors can be cross-compared to measurements taken anywhere else in the world.

Learn more

A/MOHM Milli Ohm Meter

Use the A/MOHM in conjunction with the TA.XTPlus Texture Analyzer's multi-channel data acquisition capability to simultaneously capture the voltage or resistance of switches, gaskets and other products.

Learn more

D/R Dough Inflation System

The D/R Dough Inflation System helps measure the rheological properties of both dough and gluten during biaxial stretching, which is the relevant deformation in the cell wall material surrounding an expanding gas bubble during proof and baking.

Learn more

Dynamic Integrated Balance

The Dynamic Integrated Balance is a secondary load cell for your texture analyzer AND a synchronized scale all in one. New uses for this secondary balance are emerging all the time. It can be mounted in many configurations and has already been deployed in both pharmaceutical and personal care applications.

Learn more

Powder Flow Analyzer

The Powder Flow Analyzer features a patented helical blade that is programmed to displace powders in precise Controlled Flow sequences - leading to reproducible and highly discriminating results. SMS' PFA is a reliable, simple and affordable accessory for the TA.XTPlus, TA.XTPlus100 and TA.HDPlus.

Learn more

VolScan

The VolScan Profiler uses a non-contact method to precisely and rapidly measure the volume of bakery products. It offers rapid 3-dimensional digitization of products that can be processed mathematically to yield detailed information for immediate use or future retrieval.

Learn more

Low Force Loadcell

The 500g loadcell provides high resolution force output, with noise reduced to at least ten times less than its 30kg counterpart, and offers the setting of lower trigger forces than is possible with other loadcell capacities.

Request a quote

Loadcells

Loadcells are supplied calibrated over 0-100% of their range, the calibration information being programmed into the non-volatile memory. They are supplied in a protective case and are interchangeable.

Request a quote

Heavy Duty Platform

This is used for fixing many of the general attachments to the Texture Analyzers. It ensures the precision alignment of probes and product samples. PTFE insulating pillars provide a thermal barrier to minimise heat transfer between the sample and the Texture Analyzer.

Request a quote

Twin Blade Sample Preparation Tool

This tool is for those looking for a simple and quick means of preparing samples of repeatable width, height or thickness. This is of particular importance when required to prepare cubed samples for compression testing or when a sample of uniform width is necessary for tests using blade fixtures.

Request a quote

Shatter Screen

Constructed from heavy duty perspex sheet and giving a high degree of protection during destruction testing, the Shatter Screen is a cost-effective option for any of the Texture Analyzer range.

Request a quote

Safety Screen

This screen ensures maximum protection when testing brittle samples to destruction. Easily installed on any model of Texture Analyzer, it is supported by gas struts for easy access to the testing area, and is configured to allow instument operation only when in the closed position.

Request a quote

Circular Sample Support

Used to provide stable support for circular samples for e.g. penetration/compression tests with the ability to retain any potential fluid expressed during the test.

Request a quote

Bloom Jars

ISO Standard jar for Gelatine testing. Jars have an internal diameter of 59mm and a capacity of approximately 155ml. A Centralising Base which fits in the heavy duty platform is also available for quick jar centralisation.

Request a quote

Flexible Clamping Arm

The Flexible Clamping Arm may be used for the holding of such devices as pipettes or temperature probes over the sample (around the testing area) via a strong clamp with spring-loaded jaws.

Request a quote

Remote Switch

This USB User Programmable Remote Switch is able to replicate a key switch combination – particularly useful if your PC is not situated adjacent to your texture analyzer and you wish to commence or observe a test whilst standing next to your instrument.

Request a quote

Barcode Scanner

With the aid of a BASIC script, a product barcode can be scanned to automatically select the correct project ready for testing, allowing even more automation and reducing user error.

Request a quote

Core Borer

For the preparation of repeatable diameter samples by insertion into the sample mass.

Request a quote

Dust Cover

Texture Analyzer Dust Covers are made from waterproof light grey nylon with mid blue rib edging. They provide excellent environmental protection for the instrument when not in use.

Request a quote

Transportation Case

This case accommodates a single column Texture Analyzer with additional space for accessories and tools.

Request a quote

Probe Display Case

Perspex display bases are made to special order and can accommodate 6, 12 or 18 probes. They facilitate easy selection and safe storage. Probe code numbers and quantity must be specified when ordering.

Request a quote

Probes and Fixtures

Texture Technologies offers the industry's widest array of texture measurement probes, fixtures, and accessories for use with Stable Micro Systems' TA.XTPlus family of Texture Analyzers.

Learn more