When you choose TTC, you're choosing products and a team you can trust.

We are the leader in texture analysis instruments for major universities, Fortune 500 companies, and more

Our customers rely on us to help them choose testing equipment that accurately and cost-effectively meets all of their texture analysis needs. From meeting compliance requirements in the pharmaceutical and cosmetics industries to achieving quality standards in foods and medical devices, clients trust us to provide them with product testing solutions that make their job easier and deliver reliable texture analysis. Our comprehensive line of materials testing solutions measures the composition, performance and market viability of thousands of adhesives, films, gels, and powders as well as building materials and electronics products.

We were founded in 1989 and are the exclusive North American Distributor of Stable Micro System's (SMS) family of Texture Analyzers, including the TA.XTPlus, TA.HDPlus, and TA.XTExpress. Headquartered in Hamilton, Massachusetts, Texture Technologies has regional offices in Illinois, New Jersey, Georgia, California, New York, and additional channels in Mexico.

Texture Technologies is renowned for its extensive sales and training support and will go to great lengths to understand your testing challenge, discuss the best test method for your specific need, and help to ensure that you choose the right tool for your product testing need. Contact us to speak with your region’s Texture Technologies representative.

Read our Overview of Texture Profile Analysis

(It's the most cited and comprehensive source for TPA)

Malcolm Bourne and Marc Johnson at IFT 2015
Marc Johnson, President of TTC, with Dr. Malcolm Bourne, Professor Emeritus, Department of Food Science, Cornell University and author of "Food Texture and Viscosity"
Boine and Alina at IFT 2003
TTC founder Boine Johnson and Dr. Alina Surmacka Szczesniak, creator of the original Texture Profile Analysis test.

Wondering how texture analysis can benefit your team?

featured customer story

It’s the same no matter how you slice it.

A large-scale bakery company wanted to ensure that their bread products had the same quality and consistency. They had a few issues to address before they could meet this goal. Manufacturing equipment was different from plant to plant. Ingredients varied from local suppliers. Yet, consumers expected the same product no matter where was purchased....

Continue reading
featured customer story

The TA.XTPlus works doggone hard for cats.

A major pet foods company worked their TA.XT*Plus* non-stop. The instrument performed literally thousands of tests a day on the company’s cat kibble products. The instrument was such a time saver that it was used in many critical business operations....

Continue reading
featured customer story

Getting unstuck before production does.

An animal health care company manufactures a chewable supplement for animals. Their production process was grinding to a halt frequently. Their extruders were often clogged when the product formulation varied on the thick side. It would take 2-3 days to clean the extruders and get production running again. The manufacturing downtime was very expensive....

Continue reading
featured customer story

New container spills and R&D cleans up the mess.

A confectionery company was in the midst of developing a new product container for one of their long-standing and popular products. The marketing team was leading the charge and was eager to roll out the new packaging as soon as possible. They soon encountered a big problem. While the new container looked modern and hip, it didn’t work well. It was difficult to open and had the unfortunate tendency to open and spill its contents while in a purse or bag....

Continue reading
featured customer story

No matter where you are, it tastes great.

A popular fast food company with thousands of restaurants across North America and many suppliers in each region of the country had a fundamental problem. How could they consistently deliver the high quality products that their customers expected?...

Continue reading
featured customer story

Improving customer relationships with the TA.XTPlus.

An adhesive company had a consistency problem. One of their major customers complained that the supplier's product was not consistent from batch to batch. The problem was creating a bumpy customer/supplier relationship....

Continue reading
featured customer story

The TA.XTPlus helps new product development ‘gel’.

A new startup company produces a hydrogel used during surgical procedures. The hydrogel contains a drug that is released as the hydrogel dissolves when placed on an internal organ. The company was struggling with their testing methods. They needed to determine the strength of the gel for different formulations. The gel needed a specific strength so it would not break while being placed into position. If the gel broke it would not cover the organ surface completely and could not release the drug uniformly. If it was too weak it could not be tested with conventional universal testing machines and ASTM test methods. The company was stuck. They could not move the product forward until they could test it consistently. They contacted our team for answers....

Continue reading
featured customer story

Seeing great results testing a drug deployed via the eyes.

A pharmaceutical company was developing a new slow release drug that would be administered very precisely via the human eye. The drug had excellent potential to offer a far superior route to the brain than previous methods. It would also use lower concentrations of the drug resulting in cost savings. Eye surgery was required to administer the product. The company needed the most precise testing methods available to test the product’s safety. Their prior testing methods were not repeatable and differentiating enough....

Continue reading
featured customer story

On land and sea, better testing for a better bottom line.

A major seafood company manufactures a popular fish gel product. The product is graded by quality. The product’s grade dictates its market price. The manufacturer was frustrated with their older Japanese-style instrumentation. Labor costs in the lab were high as lab technicians had to test forty samples to obtain an accurate grade number....

Continue reading
featured customer story

Freeze, reheat, test, and repeat.

A food company had a successful line of barbecue meats and sauces. They wanted to expand their product line with the inclusion of complementary side dishes. They ran into a few problems while starting up production their new lines. They wanted the side dishes to have a consistent texture after freezing and reheating. However, their testing methods involved having a various chefs taste the product at various cook times. This manual testing was not repeatable or sensitive enough to make necessary changes to an optimal product consistency. Compounding their trouble, they were using unconventional production equipment to produce the products. They contacted us to request a more consistent and precise feedback system that would yield better control on the final product....

Continue reading
featured customer story

No matter where in the world, it’s always a good hair day.

A large personal care products company wanted to measure its hair treatment's effectiveness and validate its marketing claims for smoothness and combability. However, the company's products were manufactured around the world at several remote locations. Consistency was a problem....

Continue reading
featured customer story

Not too hot, not too cold, it’s just right.

A pharmaceutical company was developing hydrogel-based adhesives. They needed an instrument that would help them fine-tune their test methods. They wanted a high rate of test throughput and to measure subtle and rapid product temperature changes....

Continue reading
featured customer story

The TA.XTPlus helps resolve a tough (meat) problem.

A raw poultry meat supplier wanted to increase production. They began to produce bigger birds but this also produced bigger problems. The birds came from numerous suppliers and varied in age and breed that sometimes yielded firmer, tougher meat. The firmer meat displeased a major customer. Eager to avoid losing their valuable customer, the company turned to our team for help screening undesirable meat texture....

Continue reading
featured customer story

Helping trauma center devices maximize healing and minimize harm.

A medical school developed a specialized syringe to be used in trauma centers. Of course, patient safety was their top concern. They first needed to know how much force it would take to inject their product into a human body. If too much force was needed, doctors would not be able to use the syringe. If too little force was needed, the viscosity would be insufficient to perform as intended and dosage control would be more difficult....

Continue reading
featured customer story

Time-consuming methods become timesaving.

A large seed company was stuck with a laborious testing process for breeding new genetic variations of seedlings. They wanted to find variations that would better tolerate hotter conditions. They tested and recorded manually hundreds of samples....

Continue reading
featured customer story

Creating the perfect not too soft, not too firm blend.

A shortening manufacturer relied on chemical analysis as a proxy for testing its product firmness. Chemical analysis helped ensure that product batches were consistent, however, it could not give them a comprehensive picture of the physical characteristics of the product. Batches of the product were inconsistently too hard or too soft for handling and product blending. They contacted our team for help....

Continue reading
featured customer story

A startup produce company grows thanks to the TA.XTPlus.

A new manufacturing start-up was developing products using quinoa, a high-protein grain-like seed. Their small team knew that they were launching their products in a competitive market. The texture of their products had to be just right to stand out from the competition. As with most startups, cash was precious. However, they knew that a texture analyzer would be an excellent investment to help them more efficiently refine and improve their products. Quinoa can be a difficult product to test so they needed a precise instrument for testing....

Continue reading
featured customer story

The TA.XTPlus shows its sensitive side.

An adhesive company developed a special product with very low tack force. The product was strong enough to stick to whatever it was applied to but required almost zero force to pull off. The company needed an instrument that was sensitive enough to measure such an extremely low tack....

Continue reading
featured customer story

Clogged and bogged by bad dough.

A snack food company that makes sandwich crackers and cookies was wrestling with a production problem involving bad dough. Occasionally dough batches would either be mixed incorrectly or left in the dough proofing room for an incorrect amount of time. Once the bad dough entered the production line, it could shut down the whole line for hours while it was cleaned. The company was losing money from these stoppages. They reached out to us for help determining when the dough was properly mixed and was ready to move from the proofing room to production....

Continue reading
featured customer story

Putting marketing claims to the test.

A manufacturer of soy-based sushi wraps wanted a texture analyzer for testing the quality of their products. The company prided itself on the quality and freshness of its products and used these claims in their marketing materials. It was critically important to back up these claims with science. They also wanted to ensure that their products were consistently made exactly the same each time. The company evaluated the Brookfield CT3 and was disappointed that it did not have the accuracy and reliability they needed....

Continue reading
featured customer story

No buyer’s remorse with the TA.XTPlus.

A major food ingredients company had used our older TA.XT2i texture analyzer for many years. While happy with their older instrument, they decided to purchase an Instron texture analyzer when upgrading to a newer instrument. They were immediately dissatisfied. They couldn’t get the kind of data that they needed. The instrument and its software were difficult to use. Support options were lacking....

Continue reading
featured customer story

The best customer complaints are the ones that never happen.

A pharmaceutical company manufactures a pectin-based gummy chewable. The R&D team ran into two significant problems that could be the sources of future consumer complaints. The product’s firmness varied from batch to batch and the sole testing method for firmness was to squish a sample by hand. The product also had some adhesion issues when the gummy pieces stuck and fused together in their containers over time....

Continue reading
featured customer story

University department keeps its students in the know.

The TA.XT*Plus* texture analyzer is a frequent fixture in university labs all over the world. However, one university realized that its texture analyzer was underutilized. Many of the original graduate students trained on the TA.XT*Plus* had graduated. Newer students didn’t know how to use the instrument and were missing valuable learning and research opportunities. The university contacted us for assistance....

Continue reading

Our experience sets us apart. Use us as part of your testing team!

As Stable Micro Systems’ exclusive distributor for the past three decades we have partnered with universities and companies to address how to help them address every testing challenge they have had. We will work just as hard to understand your testing needs and then recommend the appropriate instrument, fixtures and test methods to solve your problems.